Publications 2014 | INSTITUTE OF ADVANCED TECHNOLOGY (ITMA)
» RESEARCH » Research Publications » Publications 2014

Publications 2014

  1. Senthilkumar, K., Kalaivani, T., Kanagesan, S., Balasubramanian, V., Low temperature method for synthesis of ZnS quantum dots and its luminescence characterization studies, Applied Surface Science, 264, pp 17-20 (2013). IF: 2.103.
  2. Ghani, W.A.W.A.K. , Mohd, A., Da Silva, G., Bachmann, R.T., Taufiq-Yap, Y.H, Rashid, U, Al-Muhtaseb, A.H., Biochar production from waste rubber-wood-sawdust and its potential use in C sequestration: Chemical and physical characterization, Industrial Crops and Products, 44, pp 18-24 (2013). IF: 2.469.
  3. Matori, K.A. , Zaid, M.H.M. , Aziz, S.H.A. , Kamari, H.M. , Wahab, Z.A., Study of the elastic properties of (PbO)x(P2O 5)1-x lead phosphate glass using an ultrasonic technique, Journal of Non-Crystalline Solids, 361(1), pp 71-81 (2013). IF: 1.537.
  4. Al Ali, S.H.H., Al-Qubaisi, M., Hussein, M.Z., Ismail, M., Bullo, S., Hippuric acid nanocomposite enhances doxorubicin and oxaliplatin-induced cytotoxicity in MDA-MB231, MCF-7 and Caco2 cell lines, Drug Design, Development and Therapy, 7, pp 25-31 (2013). IF: 2.877.
  5. Ramli, M., Hussein, M.Z., Yusof, K., Preparation and characterization of an anti-inflammatory agent based on a zinc-layered hydroxide-salicylate nanohybrid and its effect on viability of Vero-3 cells, International Journal of Nanomedicine, 8, pp 297-306 (2013). IF: 3.13.
  6. Sabbaghizadeh, R., Hashim, M., Effects of heat treatment on the magnetic properties of melt-spun Nd6Pr1Fe76B12Ti4C1Co3nanocomposite ribbons, Electronic Materials Letters, 9(1), pp 115-118 (2013). IF: 1.819.
  7. Jesurani, S., Kanagesan, S., Hashim, M., Ismail, I., Dielectric properties of Zr doped CaCu3Ti4O 12 synthesized by sol-gel route, Journal of Alloys and Compounds, 551, pp 456-462 (2013). IF: 2.289.
  8. Ismail, I., Hashim, M., Ibrahim, I.R., Nazlan, R., Mohd Idris, F., Shafie, S.E., Manap, M., Bahmanrokh, G., Abdullah, N.H., Wan Rahman, W.N., Crystallinity and magnetic properties dependence on sintering temperature and soaking time of mechanically alloyed nanometer-grain Ni0.5Zn 0.5Fe2O4, Journal of Magnetism and Magnetic Materials, 333, pp 100-107 (2013). IF: 1.78.
  9. Zamiri, R., Zakaria, A., Ahanger, H.A., Darroudi, M., Rizwan Drummen, G.P.C., The effect of laser repetition rate on the LASiS synthesis of biocompatible silver nanoparticles in aqueous starch solution, International Journal of Nanomedicine, 8, pp 233-244 (20013). IF: 3.13.

10.Bahmanrokh, G.A , Hashim, M., Soltani, N.B., Ismail, I.A., Vaziri, P.C., Navaseri, M.B., Erfani, M.B., Kanagesan, S., High coercivity sized controlled cobalt-gold core-shell nano-crystals prepared by reverse microemulsion, Materials Research Bulletin, 48(10), pp 4039-4047 (2013). IF: 1.913.

11.Fauzana, A.N., Azmi, B.Z., Sabri, M.G.M., Wan Abdullah, W.R., Hashim, M., Microstructural and nonlinear electrical properties of ZnO ceramics with small amount of MnO2 dopan, Sains Malaysiana, 42(8), pp 1139-1144 (2013). IF: 0.408.

12.Sabbaghizadeh, R., Hashim, M., Moraddeh, S., Dependence of microstructure and magnetic properties of (Nd,Pr)-(Fe,Ti,C)-B melt-spun ribbon on quenching wheel speed, Electronic Materials Letters, 9(3), pp 337-340 (2013). IF: 1.87.

13.Sabbaghizadeh, R., Hashim, M., Bahmanrokh, G., Shafie, S.E., Effects of Ti and C additions on the microstructures and magnetic properties of Nd9.4Pr0.6FebalCo6B6Ga0.5 melt-spun ribbons, Journal of Nanoelectronics and Optoelectronics, 8(3), pp 302-305, IF: 0.479.

14.Bahmanrokh, G.A. , Hashim, M., Soltani, N.B., Ismail, I.A., Vaziri, P.C., Shafie, M.S.E., Navaseri, M., A simple method for measuring intrinsic blocking temperature in superparamagnetic nanomaterials, Journal of Superconductivity and Novel Magnetism, 26(2), pp 407-414 (2013). IF:0.702.

15.Kura, A.U., Al Ali, S.H. H., Hussein, M. Z., Fakurazi, S., Arulselvan, P., Development of a controled-release anti-parkinsonian nanodelivery system using levodopa as the active agent, International Journal of Nanomedicine, 8, pp 1103-1110 (2013). IF: 3.463.

16.Hussein-Al-Ali, S.H., Al-Qubaisi, M., El Zowalaty, M., Hussein, M. Z. & Ismail, M., Antimicrobial Activity of Hippurate Nanocomposite and Its Cytotoxicity Effect in Combination with Cytarabine against HL-60, Journal of Nanomaterials, (2013), IF: 1.547.

17.Megat Nabil Mohsin, S., Hussein, M. Z., Sarijo, S.H., Fakurazi, S., Arulselvan, P., Taufiq Yap,Y.H., Synthesis of (cinnamate-zinc layered hydroxide) intercalation compound for sunscreen application, Chemistry Central Journal, 7(1), pp 26 (2013). IF: 1.31.

18.Hussein, M.Z., Meihua, J.T., Fakurazi, S., Ithnin, H., The evolutionary development in drug discovery and delivery, Journal of Drug Delivery Science and Technology, 23(3), pp 195-205 (2013). IF: 1.57.

19.Ramimoghadam, D. , Hussein, M.Z., Taufiq-Yap, Y.H., Synthesis and characterization of ZnO nanostructures using palm olein as biotemplate, Chemistry Central Journal, 7(1), pp 71 (2013). IF: 1.31.

20.Barahuie, F., Hussein, M.Z. , Hussein-Al-Ali, S.H., Arulselvan, P., Fakurazi, S., Zainal, Z., Preparation and controlled-release studies of a protocatechuic acid-magnesium/aluminumlayered double hydroxide nanocomposite, International Journal of Nanomedicine, 8, pp 1975-1987 (2013). IF: 3.463.

21.Wong, Y.J., Hassan, J., Hashim, M., Dielectric properties, impedance analysis and modulus behavior of CaTiO3 ceramic prepared by solid state reaction, Journal of Alloys and Compounds, 571, pp 138-144 (2013). IF: 2.39.

22.Kanagesan, S., Hashim, M., Jesurani, S., Kalaivani, T., Ismail, I., Ahmod, C.S., Effect of microwave sintering on microstructural and magnetic properties of strontium hexaferrite using sol-gel technique, Journal of Materials Science: Materials in Electronics, (2013). IF: 1.486.

23.Abdollahi, Y., Zakaria, A., Abbasiyannejad, M., Masoumi, H.R.F., Moghaddam, M.G., Matori, K.A., Jahangirian, H., Keshavarzi, A., Artificial neural network modeling of p-cresol photodegradation, Chemistry Central Journal, 7(1), pp 96 (2013). IF: 1.31.

24.Ghamarian, N., Zainal, Z., Zidan, M., Tan, W.T., Photocorrosion of CuInSe2 thin film by electrochemical polarization in acidic and alkaline medium, International Journal of Electrochemical Science, 8(4), pp 5161-5171 (2013). IF: 3.729.

25.25. Ghamarian, N., Zainal, Z. , Zidan, M., Tan, W.T., Pulse electrochemical deposition and photo-electrochemical characterization of CuInSe2 thin films, International Journal of Electrochemical Science, 8(1), pp 312-322 (2013)IF: 3.729.

26.Saifullah, B., Hussein, M.Z., Hussein-Al-Ali, S.H., Palanisamy Arulselvan, Sharida Fakurazi, Sustained release formulation of an anti-tuberculosis drug based on para-amino salicylic acid-zinc layered hydroxide nanocomposite, Chemistry Central Journal, 7, pp 72 (2013). IF: 1.31.

27.Abdul Latip, A. F., Hussein, M.Z., Stanslas, J., Wong, C.C., & Adnan, R., Release behavior and toxicity profiles towards A549 cell lines of ciprofloxacin from its layered zinc hydroxide intercalation compound, Chemistry Central Journal, 7, pp 119 (2013), IF: 1.31.

28.Masoudi, M., Hashim, M., Mohamed Kamari, H., Characterization of novel Ni–Al2O3–SiC nanocomposite coatings synthesized by co-electrodeposition, Appl Nanosci.

29.Shameli, K., Ahmad, M.B., Shabanzadeh, P., Jaffar Al-Mull, E.A., Zamanian, A., Abdollahi, Y., Jazayeri, S.D., Eili, M., Jalilian, F.A., Haroun, R.Z., Effect of Curcuma longa tuber powder extract on size of silver nanoparticles prepared by green method, Research on Chemical Intermediates.

30.Sivakumar, M. , Kanagesan, S., Umapathy, V., Suresh Babu, R., Nithiyanantham, S., Study of CoFe2O4 particles synthesized with various concentrations of PVP polymer, Journal of Superconductivity and Novel Magnetism, 26(3), pp 725-731 (2013). IF: 0.702.

31.Mamat, M., Kusrini, E., Hj Yahya, A., Hussein, M.Z., Zainal, Z., Intercalation of Anthranilate ion into zinc-aluminium layered double hydroxide, International Journal of Technology, 1 , pp 73-80 (2013).

32.Megat Nabil Mohsin, S., Hussein, M. Z., Sarijo, S.H., Fakaruzi, S., Arulselvan, P., & Taufiq-Yap, Y.Y., Characterization of novel Ni–Al2O3–SiC nanocomposite coatings synthesized by co-electrodeposition, Chemistry Central Journal, 7, pp 26 (2013).

33.Sivakumar, M. , Kanagesan, S. , Chinnaraj, K., Suresh Babu, R., Nithiyanantham, S.,Synthesis, characterization and effects of citric acid and PVA on magnetic properties of CoFe2O4, Journal inorg organomer, 23, pp 439-445 (2013).

34.Ahmed, A.A.A., Talib, Z.A., Hussein, M.Z., Influence of metallic molar ratio on the electron spin resonance and thermal diffusivity of Zn-Al layered double hydroxide, Journal of Nanomaterials, art. no. 639354. IF: 1.547.

35.Dorniani, D., Hussein, M.Z.B., Kura, A.U., Fakurazi, S., Shaari, A.H., Ahmad, Z., Preparation and characterization of 6-mercaptopurine-coated magnetite nanoparticles as a drug delivery system, Drug Design, Development and Therapy, 7, pp 1015-1026 (2013). IF: 3.486.

36.Ramimoghadam, D., Hussein, M.Z., Taufiq-Yap, Y.H., Hydrothermal synthesis of zinc oxide nanoparticles using rice as soft biotemplate, Chemistry Central Journal, 7(1), art. no. 136, IF: 1.31.

37.Lim, Y.C., Zainal, Z., Hussein, M.Z., Tan, W.-T., Morphology and dimensions controlled of titania nanotubes in mixed organic-inorganic electrolyte, Advanced Materials Research , 686,pp 13-17 (2013).

38.Rameshbabu, R., Ramesh, R., Kanagesan, S., Karthigeyan, A., Ponnusamy, S., Synthesis of superparamagnetic ZnFe2O4 nanoparticle by surfactant assisted hydrothermal method, Journal of Materials Science: Materials in Electronics, 24(11), pp 4279-4283 (2013).

39.Senthilkumar, K., Kalaivani, T., Kanagesan, S., Balasubramanian, V., Balakrishnan, J., Wurtzite ZnSe quantum dots: Synthesis, characterization and PL properties, Journal of Materials Science: Materials in Electronics , 24(2), pp 692-696 (2013).

40.Jahangirian, H., Haron, M.J., Shah Ismail, M.H., Rafiee-Moghaddam, R., Afsah-Hejri, L., Abdollahi, Y., Rezayi, M., Vafaei, N., Well diffusion method for evaluation of antibacterial activity of copper phenyl fatty hydroxamate synthesized from canola and palm kernel oils, Digest Journal of Nanomaterials and Biostructures, 8(3), pp 1263-1270 (2013).

41.Haron, M.J., Jahangirian, H., Ismail, M.H.S., Rafiee-Moghaddam, R., Rezayi, M., Shameli, K., Gharayebi, Y., Abdollahi, Y., Peyda, M., Mahdavi, B., Antifungal properties of phenyl fatty hydroxamic acids and their copper complexes synthesized based on canola and palm kernel oils, Asian Journal of Chemistry, 25(1), pp 4183-4188 (2013).

42.Abdollahi, Y., Zakaria, A., Aziz, R. S., Ahmad Tamili, S. N., Matori, K. A., Mohd Shahrani, N. M., Mohd Sidek, N., Dorraj, M., & Moosavi, S., Optimizing Bi2O3 and TiO2 to achieve the maximum non-linear electrical property of ZnO low voltage varistor, Chemistry Central Journal, 7, pp 137-147 (2013). IF: 1.31.

43.Fadaeifard, F., Gharavi, F., Matori, K. A., Daud, A. R., Mohd Ariffin, M.K.A., Awang, M., Investigation of Microstructure and Mechanical Properties of Friction Stir Lap Welded AA 6061-T6 in Various Welding Speeds, Journal of Applied Sciences, 2013.

44.Dorniani, D., Hussein, M. Z., Kura, A.U., Fakurazi, S., Shaari, A.h., & Ahmad, Z., Sustained Release of Prindopril Erbumine from Its Chitosan-Coated Magnetic Nanoparticles for Biomedical Applications, International Journal of Molecular Sciences, 14(12), pp 23639-23653 (2013). IF: 2.464.

45.Barahuie, F., Hussein, M.Z., Arulselvan, P., Fakurazi, S., Zainal, Z., Development of the anticancer potential of a chlorogenate-zinc layered hydroxide nanohybrid with controlled release property against various cancer cells, Science of Advanced Materials, 5(12), pp 1983-1993 (2013). IF: 2.509.

46.Sheikh Mohd Ghazali, S.A.I. , Hussein, M.Z., & Sarijo, S.H. ,3,4-Dichlorophenoxyacetate interleaved into anionic clay for controlled release formulation of a new environmentally friendly agrochemical, Nanoscale Research Letters, 8, pp 362. IF: 2.524.

47.Saifullah, B., Hussein, M.Z., Hussein-Al-Ali ,S.H., Arulselvan, P., Fakurazi, S., Antituberculosis nanodelivery system with controlled-release properties based on para-amino salicylate-zinc aluminum-layered double-hydroxide nanocomposites, Drug Design, Development and Therapy , 7, pp 1365-1375 (2013). IF: 3.486.

48.Sabbaghizadeh, R., Hashim, M., Gholamipour, R., Bahmanrokh, G.H., Kanagesan, S., Phase transformation, structure and magnetic properties Of Nd9.4Pr0.6FebalTixCxCo6Ga0.5B6 ribbons prepared by melt-spinning method, Digest Journal of Nanomaterials and Biostructures , 8(4), pp 1791-1798 (2013). IF: 1.902.

49.Kanagesan, S., Hashim, M., Tamilselvan, S., Alitheen, N.B., Ismail, I., Syazwan, M., Zuikimi, M.M.M., Sol-gel auto-combustion synthesis of cobalt ferrite and it's cytotoxicity properties, Digest Journal of Nanomaterials and Biostructures, 8 (4), pp 1601-1610 (2013). IF: 1.902.

50.Mohd Idris, F. , Hashim, M. , Ismayadi, I. , Idza, I.R. , Manap, M.,and Shafie, M.S.E. ,Broadening of em energy-absorption frequency band by micrometer-to- nanometer grain size reduction in nizn ferrite IEEE Transactions on Magnetics, 49(11), pp 5475-5479 (2013). IF: 1.422.

51.Lim, Y.C. , Zainal, Z. , Hussein, M.Z. , Tan, W.T. ,the effect of heat treatment on phase transformation, morphology and photoelectrochemical response of short tio2 nanotubes, Digest Journal of Nanomaterials and Biostructures, 8(1), pp 167 – 176. (2013). IF: 1.902.

52.Hussein, M.Z., Samuri, N. S. , Shaari, A. H ,The Effect of Synthesis Method on the Physico-chemical Properties of Magnetite Iron Oxide Nanoparticles, Advanced Materials Research, 7, pp 212-216 (2013).

53.Aziz, S. , Rashid, S., Mohd Salleh, M.A, Theoretical prediction of CNT-CF/PP composite tensile properties using various numerical modeling methods, Fullerenes Nanotubes and Carbon Nanostructures, 21(5), pp 411-416 (2013). IF: 0.772.

54.Rahmanian, S, Thean, K.S., Suraya, A.R. , Shazed, M.A, Mohd Salleh, M.A., Yusoff, H.M., Carbon and glass hierarchical fibers: Influence of carbon nanotubes on tensile, flexural and impact properties of short fiber reinforced composites, Materials and Design, 43, pp 10-16 (2013). IF: 2.2.

55.Ishak, M.R , Sapuan, S.M., Leman, Z., Rahman, M.Z.A., Anwar, U.M.K., Siregar, J.P, Sugar palm (Arenga pinnata): Its fibres, polymers and composites , Carbohydrate Polymers, 91(2), pp 699-710 (2013). IF: 3.628.

56.Rashid u, Ibrahim M, Yasin S, Yunus R, Taufiq-Yap YH, Knothe G, Biodiesel from Citrus reticulata (mandarin orange) seed oil, a potential non-food feedstock, Industrial Crops and Products, 45, pp 355-359 (2013). IF: 2.469.

57.Ishak MR, Leman Z, Salit MS, Rahman MZA, Anwar UYUP MK, Akhtar R, IFSS, TG, FT-IR spectra of impregnated sugar palm (Arenga pinnata) fibres and mechanical properties of their composites, Journal of Thermal Analysis and Calorimetry, 111(2), pp 1375-1383 (2013). IF: 1.604.

58.Nur Zalikha Rebitanima, Wan Azlina Wan Ab Karim Ghani, Nur Akmal Rebitanim, Mohamad Amran Mohd Salleh, Potential applications of wastes from energy generation particularly biochar in Malaysia, Renewable and Sustainable Energy Reviews, 21, pp 694-702 (2013). IF: 6.018.

59.Fatah H. Alhassan, Robiah Yunus, Umer Rashid, Kamaliah Sirat, Aminul Islam, H.V. Lee, Yun H. Taufiq-Yap, Production of biodiesel from mixed waste vegetable oils using Ferric hydrogen sulphate as an effective reusable heterogeneous solid acid catalyst, Applied Catalysis A: General, 456, pp 182-187 (2013). IF: 3.903.

60.S. Rahmanian, A.R. Suraya, R. Zahari, E.S. Zainudin, Synthesis of vertically aligned carbon nanotubes on carbonfiber, Applied Surface Science, 271, pp 424-428 (2013). IF: 2.103.

61.Shenvi, S.S., Rashid, S.A., Ismail, A.F., Kassim, M.A., Isloor, A.M., Preparation and characterization of PPEES/chitosan composite nanofiltration membrane, Desalination, 315, pp 135-141 (2013). IF: 2.59.

62.Rashid, S.A., Rashid, M.Z.A., Musa, M.A., Othman, S.H., Assessment of gas flow characteristics and reaction kinetics of chemical vapour deposition reactors for the production of nano-hybrid fibres, Asia-Pacific Journal of Chemical Engineering, 8(2), pp 254-261 (2013). IF: 0.758.

63.Fariba Mahdavi, Suraya Binti Abdul Rashid, Mohd Khanif Yusop, INTERCALATION OF UREA INTO KAOLINITE FOR PREPARATION OF CONTROLLED RELEASE FERTILIZER, Chemical Industry and Chemical Engineering, 1, pp 1-1 (2013). IF: 0.61.

64.Ishak, M.R., Leman, Z., Sapuan, S.M., Rahman, M.Z.A., Anwar, U.M.K., Impregnation modification of sugar palm fibres with phenol formaldehyde and unsaturated polyester, Fibers and Polymers, 14(2), pp 250-257 (2013). IF: 0.836.

65.Sahari, J., Sapuan, S.M., Zainudin, E.S., Maleque, M.A., Thermo-mechanical behaviors of thermoplastic starch derived from sugar palm tree (Arenga pinnata), Carbohydrate Polymers, 92(2), pp 1711-1716 (2013). IF: 3.628.

66.Sahari, J., Sapuan, S.M., Zainudin, E.S., Maleque, M.A., Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree, Materials and Design, 49, pp 285-289 (2013). IF: 2.2.

67.Sahari, J.; Sapuan, S.M.; Zainudin, E.S.; Maleque, M.A., Effect of Water Absorption on Mechanical Properties of Sugar Palm Fibre Reinforced Sugar Palm Starch (SPF/SPS) Biocomposites, Journal of Biobased Materials and Bioenergy, 7(1), pp 90-94(5) (2013). IF: 1.037.

68.Rehman, K., Ashraf, S., Rashid, U., Ibrahim, M., Hina, S., Iftikhar, T., Ramzan, S., Comparison of proximate and heavy metal contents of vegetables grown with fresh and wastewater, Pakistan Journal of Botany, 45(2), pp 391-400 (2013). IF: 0.907.

69.Mushtaq, M., Tan, I.M., Nadeem, M., Devi, C., Lee, S.Y.C., Sagir, M., Rashid, U., Epoxidation of methyl esters derived from Jatropha oil: An optimization study, Grasas y Aceites, 64(1), pp 103-114 (2013). IF: 1.138.

70.Rasool Nasir, Afzal Sania, Riaz Muhammad, Rashid Umer, Rizwan Komal, Zubair Muhammad, Ali Shafqat, Shahid Muhammad, Evaluation of antioxidant activity, cytotoxic studies and GC-MS profiling of matthiola incana (stock flower), Legume Research - An International Journal, 36(1), pp 21-32 (2013).

71.Ahsan, A., Imteaz, M., Dev, R., Arafat, H.A., Numerical models of solar distillation device: Present and previous, Desalination, 311, pp 173-181 (2013). IF: 2.59.

72.T. Arunkumar, D. Denkenberger, Amimul Ahsan, R. Jayaprakash, The augmentation of distillate yield by using concentrator coupled solar still with phase change material, Desalination, 314, pp 189-192 (2013). IF: 2.59.

73.Rajesha Kumar, Arun M. Isloor, A. F. Ismail, Suraya A. Rashid and T. Matsuura, Polysulfone–Chitosan blend ultrafiltration membranes: preparation, characterization, permeation and antifouling properties, The Royal Society of Chemistry, 3(21), pp 7855-7861 (2013). IF: 2.562.

74.Siti Hajar Othman, Suraya Abdul Rashid, Tinia Idaty Mohd. Ghazi and Norhafizah Abdullah, TiO2 Nanoparticles prepared by MOCVD: effect of temperature, flowrate, and precursor, ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, 8, pp 32-44 (2013). IF: 0.758.

75.Sayyar S, Abidin ZZ, Yunus R, Optimisation of Solid Liquid extraction of jatropha oil using petroleum ether, Asia-Pacific Journal of Chemical Engineering, 8(3), pp 331-338 (2013). IF: 0.797.

76.Hudzari RM, Sapuan SM, Syazili R, Azhar AWM, Optical properties analysis for crop maturity index, Journal of food, agriculture and environment, 11(2), pp 571-575 (2013).

77.Sahari J, Sapuan SM, Zainudin ES, Maleque MA, Flexural and impact properties of biopolymer derived from sugar palm tree, Advanced Material Research, 701, pp 225-228 (2013).

78.Ibrahim AH, Leman Z, Mohd Sapuan S, Tensile properties of impregnated sugar palm (Arenga pinnata) fibre composite filled thermosetting polymer composites, Advanced Material Research, 701, pp 8-11 (2013).

79.Ghaemi F, Yunus R, Ahmadian A, Salahshour S, Suleiman M, Saleh SF, Application of fuzzy fractional kinetic equations to medulling of the acid hydrolysis reaction, Abstract and Applied Analysis, art 610314. IF: 1.102.

80.Zulkifli NWM, Kalam MA, Masjuki HH, Shahabuddin M, Yunus R, Wear prevention characteristics of a palm oil-based TMP (Trimethylolpropane) ester as an engine lubricant, Energy, 54, pp 167-173 (2013). IF: 3.651.

81.Emiliana Rose Jusoh, Mohd Halim Shah Ismal, Luqman Chuah Abdullah, Robiah Yunus, Wan Aizan Wan Abdul Rahman, Effect of crude palm oil as plasticiser on the mechanical and morphology properties of low density polyethlene blown film, Int. journal of materials engineering innovation, 4, pp 302-313 (2013).

82.M.A. Sokoto, *, L.G. Hassan, M.A. Salleh, S.M. Dangoggo and H.G. Ahmad, Quality Assessment and Optimization of Biodiesel from Lagenaria Vulgaris (Calabash) Seeds Oil, Int. J. Pure Appl. Sci. Technol, 15(1).

83.M.A. Sokoto, *, L.G. Hassan, M.A. Salleh, S.M. Dangoggo and H.G. Ahmad, Thermo-Chemical Properties of Lagenaria Vulgaris,Lagenaria Ladle and Cucurbita Pepo de-Oiled Cakes, Int. J. Pure Appl. Sci. Technol., 18(1). IF: 0.367.

84.Rahman, Mukhlesur; Salleh, Mohamad Amran Mohd; Rashid, Umer; Ahsan, Amimul; Hossain, Mohammad Mujaffar; Ra, Chang Six;, Production of slow release crystal fertilizer from wastewaters through struvite crystallization-A review, Arabian Journal of Chemistry(2013).

85.Shazed, MA; Suraya, AR; Rahmanian, S; Mohd Salleh, MA;, Effect of fibre coating and geometry on the tensile properties of hybrid carbon nanotube coated carbon fibre reinforced composite, Materials and Design, 54, pp 660-669 (2013).

86.Syuhada, N., Ahsan, A., Thomas, U.A., Imteaz, M., Ghazali, A.H., A low cost solar still for pure water production, Journal of Food, Agriculture and Environment, 11(2), pp 990-994 (2013). IF: 0.435.

87.Rahman, M.M., Saidur, R., Mekhilef, S., Uddin, M.B., Ahsan, A., Double-diffusive buoyancy induced flow in a triangular cavity with corrugated bottom wall: Effects of geometrical parameters, International Communications in Heat and Mass Transfer, 45, pp 64-74 (2013). IF: 2.208.

88.Imteaz, M.A., Ahsan, A., Shanableh, A., Reliability analysis of rainwater tanks using daily water balance model: Variations within a large city, Resources, Conservation and Recycling, 77 , pp 37-43 (2013). IF: 2.319.

89.Thirugnanasambantham, A., Rajan, J., Ahsan, A., Kumar, V., Effect of air flow on tubular solar still efficiency, Iranian Journal of Environmental Health Science and Engineering, 10(31). IF: 1.227.

90.S.M. Sapuan, H.Y. Lok, M.R. Ishak and S. Misri, Mechanical properties of hybrid glass/sugar palm fibre reinforced unsaturated polyester composites, Chinese Journal of Polymer Science, 31(10), pp 1394-1403 (2013).

91.Vaithilingam, C.A., Misron, N., Aris, I., Marhaban, M.H., Nirei, M., Electromagnetic design and FEM analysis of a novel dual-air-gap reluctance machine, Progress in Electromagnetics Research, 140, pp 523-544 (2013).

92.Ghaemi, F., Yunus, R., Ahmadian, A., Salahshour, S., Suleiman, M., Saleh, S.F., Application of fuzzy fractional kinetic equations to modelling of the acid hydrolysis reaction, Abstract and Applied Analysis, art. no. 610314.

93.Jusoh, E.R., Ismail, M.H.S., Abdullah, L.C., Yunus, R., Abdul Rahman, W.A.W., Effect of crude palm oil as plasticiser on the mechanical and morphology properties of low density polyethylene blown film, International Journal of Materials Engineering Innovation, 4(3-4), pp 302-313 (2013).

94.Marjan bahraminasab, ali jahan, barkawi sahari, manohar arumugam, mahmoud shamsborhan and mohd roshdi hassan, Using Design of experimnets methods for accessing peak contact pressure to material propreties of soft tissue in human knee, journal of medical engineering, art 891759 , 11.

95.Umer Rashid, Farooq Anwar, Robiah Yunus, Alaa H Al-muhtaseb, Transesterification for Biodiesel Production using Thespesia popolnea Seed Oil: An Optimization Study, International journal of Green Energy, 22(14). IF: 2.069.

96.Azhari M Syam, Hamidah A Hamid, Robiah Yunus, Umer Rashid, Dynamic Modeling of Reversible Methanolysis of Jatropha curcas Oil to Biodiesel, The Scientific world journal, Art ID 268385. IF: 1.73.

97.nwm Zulkifli, MA Kalam, HH Masjuki, KAH Al Mahmud, R Yunus, The Effect of Palm oil trimethylolpropane ester on extreme pressure lubrication, SAGE journal.

98.Abidin, Z.Z. , Mohd Shamsudin, N.S., Madehi, N., Sobri, S, Optimisation of a method to extract the active coagulant agent from Jatropha curcas seeds for use in turbidity removal, Industrial Crops and Products, 41(1), pp 319-323 (2013). IF: 2.469.

99.Yusof N. A, Zakaria ND, Maamor NAM, Abdullah AH, Haron MJ, Synthesis and Characterization of Molecularly imprinted polymer membrane for the removal of 2,4-dinitrophenol, International Journal of Molecular Sciences, 14(2), pp 3993-4004 (2013). IF: 2.598.

100. S.Paiman, Q.Gao, H.H.Tan, C.Jagadish, X.Zhang, J.Zou, Effects of growth rate on InP nanowires morphology and crystal structure, Journal of crystal growth, 383, pp 100-105 (2013). IF: 1.552.

101. Bt Johari IS, Yusof NA, Haron MJ, Mohd Nor SM, Preparation and characterization of poly(ethyl hydrazide) grafted oil palm empty fruit bunch for removal of ni (ii) ion in aqueous environment, Polymers, 5(3), pp 1056-1067 (2013). IF: 1.687.

102. Rahman SFA, Yusof NA, Hashim U, Nuzaihan Md Nor M, Design and fabrication of silicon nanowire based sensor, International Journal of Electrochemical Science , 8(9), pp 10946-10960 (2013).

103. Dutse SW, Yusof NA, Ahmad H, Hussein MZ, Zainal Z, Hushairian R, DNA-based biosensor for detection of ganoderma boninse, an oil palm pathogen utilizing newly synthesized ruthenium complex [Ru(phen)2, (qtpy)]2+ based on a PEDOT-PSS/Ag nanoparticles modified electrode, International Journal of Electrochemical Science, 8(9), pp 11048-11057 (2013).

104. Daud N, Yusof NA, Nor SMM, Electrochemical Characteristic of biotinyl somatostatin-14/nafiion modified gold electrode in development of sensor for determination of hg (II), International Journal of Electrochemical Science, 8(7), pp 10086-10099 (2013).

105. Johari IS, Yusof NA, Haron MJ, Nor SMM, Preparation and charactyerization of poly (ethyl hydrazide)- grafted oil palm empty fruit bunch fibre for the removal of Cu(II) ion from an aqueous environment, Molecules, 18(7), pp 8461-8472 (2013). IF:2.428.

106. Manap MRA, Yusof NA, Nor SMM, Ahmad FBH, Spectrofluorimetric determination of arsenic (III) using dansylated peptide, Asian Journal of Chemistry, 25(8), pp 4195-4198 (2013),. IF: 0.253.

107. Lim, S.P., Huang, N.M., Lim, H.N., Solvothermal synthesis of SnO2/graphene nanocomposites for supercapacitor application, Ceramics International, 39(6), pp 6647-6655 (2013). IF: 1.789.

108. Chong, M.H., Jaafar, H., Hasan, W.Z.W., Shafie, S., Hamidun, M.N., Isa, M.M., Hawary, A.F., An experiment of thick film force sensor using mems simulation software, Journal of Theoretical and Applied Information Technology, 47(3),pp 902-910 (2013).

109. Abidin MZ, Asmat A, Hamidon MN, Identification of initial drift in semiconductor gas sensors caused by temperature variation, proceeding-2013 IEEE 9th international colloqium on signal processing and its application, art 6530057, pp 285-288 (2013).

110. Ehsani M, Hamidon MN, Pah LK, Influence of Pt on structural and morphologycal properties of La 203/Sn02 thick film, research journal of chemistry and environment, 17(10), pp 35-40, IF: 0.636.

111. Ali S.A. Jalal, Alyani Ismail, Adam R.H. Alhawar, Mohd F.A. Rasid, Nor K. Noordin, and Mohd A. Mahdi, Miniaturized Metal Mount Minkowski Fractal RFID Tag Antenna with Complementary Split Ring Resonator, Progress In Electromagnetics Research C, 39, pp 25-63 (2013).

112. S. Vijay Kumara, N.M. Huanga, H.N. Lim, M. Zainya, I. Harrisond, C.H. Chiae, Preparation of highly water dispersible functional graphene/silver nanocomposite for the detection of melamine, Sensors and Actuators B: Chemical, 181, pp 885-893 (2013). IF: 3.535.

113. Farhad L arki, Arash Dehzangi, E. B. Saion,Alam Abedini, Sabar D. Hutagalung, A.Makarimi Abdullah, and M. N. Hamidon, Simulation of transport in laterally gated junctionless transistors fabricated by local anodization with an atomic force microscope, Phys. Status Solidi A, 210(9), pp 1914-1919 (2013).

114. Marzook, A.K., Ismail, A., Ali, B.M., Sali, A., Khalaf, M.H., Khatun, S., Reduced rank technique for joint channel estimation and joint data detection in TD-SCDMA systems, Wireless Personal Communications, 69(4), pp 1629-1646 (2013). IF: 0.428.

115. Roozbeh Hushiarian, Nor Azah Yusof and Sabo Wada Dutse, Detection and control of Ganoderma boninense: strategies and perspectives, SpringerPlus.

116. Salsabila Ahmad, Suhaidi Shafie, Mohd Zainal Abidin Ab Kadir, Power feasibility of a Low Power Consumption Solar Tracker, Procedia Environmental Sciences, 17, pp 494-502 (2013).

117. Nor Azah Yusof, Siti Khadijah Ab. Rahman, Mohd Zobir Hussein and Nor Azowa Ibrahim, Preparation and Characterization of Molecularly Imprinted Polymer as SPE Sorbent for Melamine Isolation, Polymers, 5, pp 1215-1228 (2013). IF: 1.687.

118. Arash Dehzangi, Farhad Larki, Jumiah Hassan, Sabar D. Hutagalung, Elias B Saion, Mohd Nizar Hamidon, A. Makarimi abdullah, Alireza Kharazmi, Sanaz Mohammadi, Burhanoddin Y Majlis, Fabrication of p-type Double gate and Single gate Junctionless silicon nanowire transistor by Atomic Force Microscopy Nanolithography, Nano Hybrids, 3, pp 93-113 (2013).

119. R.Khakpour, MN Hamidon, GAE Vandenbosch, Development of an auto-calibrated interfacing circuit for thick film multi-gas sensor, Sensor and Actuators A: Physical, 48-57 , pp 48-57 (2013). IF: 1.8.

120. Jahwarhar Izuan Abdul Rashid, Jaafar Abdullah, Nor Azah Yusof and Reza Hajian, The Development of Silicon Nanowire as Sensing Material and Its Applications, Journal of Nanomaterials, 2013, Article ID 328093, 16 pg. IF: 1.547.

121. Noremylia Mohd Bakhori, Nor Azah Yusof, Abdul Halim Abdullah and Mohd Zobir Hussein, Development of a Fluorescence Resonance Enenrgy transfer (FRET) -based DNA biosensor for detection of synthetic Oligonucleotide of ganoderma boninense, Biosensor, 3 pp 419-428 (2013).

 

 


Updated:: 05/10/2015 [marzieana]

MEDIA SHARING

INSTITUTE OF ADVANCED TECHNOLOGY (ITMA)
Universiti Putra Malaysia
43400 UPM Serdang
Selangor Darul Ehsan
0389467531
0389467006
C1511434571